Metalbenz fabricates a traditional panel known as a ‘batten lock’ or ‘roll cap’ panel. This is a roof system with a wider ridge or bay and a metal cap. A metal panel with upstands each side is laid on plywood with a metal or wooden bay in between. A metal capping is then laid over the bay giving the roll cap system a robust appearance.
- Aesthetically Robust
300mm to 500mm, with upstand of 40mm – 60mm.
40mm – 60 mm.
0.5m – 6m.
5% or 3 degrees.
Typically plywood (min 17mm) with a recommended separating layer.
Placed between the metal skin and the substrate.
Ventilates the substrate by creating a 40mm continuous air gap behind the plywood.
Ventilation openings are created as continuous openings at eaves and ridges.
Vertical, horizontal, diagonal, curved, concave, convex, tapered, dome-like.